Belt Sanders

All Categories
Tools
Power Tools
Sanders
Belt Sanders
Filters
Clear all
Brand
Price
Filters

Applied Filters:

Sort by
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Twist-Lock Connector Female 30 Amp
Twist-Lock Connector Female 30 Amp
The Leviton 30 amp Twist-Lock plug female refers to industrial-grade locking receptacles designed for secure, high-amperage electrical connections. These are commonly used in applications like generators, RVs, and industrial equipment where a reliable, vibration-resistant connection is needed.
Model: #7065
$
35.99
Available to ship
Twist-Lock Connector Female 30 Amp
Twist-Lock Connector Female 30 Amp
The Leviton 30 amp Twist-Lock plug female refers to industrial-grade locking receptacles designed for secure, high-amperage electrical connections. These are commonly used in applications like generators, RVs, and industrial equipment where a reliable, vibration-resistant connection is needed.
Model: #7139
$
20.99
Available to ship
Twist-Lock Connector Female 30 Amp
Twist-Lock Connector Female 30 Amp
The Leviton 30 amp Twist-Lock plug female refers to industrial-grade locking receptacles designed for secure, high-amperage electrical connections. These are commonly used in applications like generators, RVs, and industrial equipment where a reliable, vibration-resistant connection is needed.
Model: #7138
$
29.99
Available to ship
P278 - Contactor
P278 - Contactor
The P278 is a Universal Contactor manufactured by Lagler. It is a critical electrical component used primarily in the Hummel floor sanding machine.
Model: #P278
$
604.89
Available to ship
P049 - Cover Fastener
P049 - Cover Fastener
The P049 – Cover Fastener is a replacement part primarily used for Lägler Hummel and Superhummel floor sanding machines. It functions as a clamp or fastener for the side cover (side door) of the machine's chassis.
Model: #P049
$
36.79
Available to ship
P167 - Circlip
P167 - Circlip
P167 – CIRCLIP is as a spare part for Lägler woodworking and floor sanding equipment.
Model: #PDPARTP167
$
5.43
Available to ship
P162 - Key
P162 - Key
This component is a parallel key (also referred to as a drum key) designed specifically for the drive system of the HUMMel sander. It is critical to note that this part is only compatible with HUMMEL drum shafts manufactured in the year 2000 and older. Machines produced after 2000 typically require a different specification.
Model: #PDPARTP162
$
6.93
Available to ship
Lagler Hummel 8
Lagler Hummel 8" Drum
The P161 is the OEM 8-inch sanding drum for the Lägler HUMMEL belt floor sander. It is a critical component responsible for the machine's sanding quality, featuring a specific convex ("football") shape that ensures smooth transitions between sanding paths and proper belt tracking. The P161 drum is made of hard rubber with a galvanised, block-scored surface designed for excellent dust extraction and high abrasion rates. Unlike other drums, it is precisely balanced at the factory to ensure low-vibration concentricity.
Model: #P161
$
827.99
Available to ship
P158 - Right-Hand Thread Nut
P158 - Right-Hand Thread Nut
The P158 is a specific right-hand thread nut manufactured by Lägler, a company known for professional floor sanding machines.These nuts are critical for securing components on the machinery where standard threading is required to maintain safety and operational integrity under vibration.
Model: #PDPARTP158
$
37.77
Available to ship
P151 - Wheel Arm
P151 - Wheel Arm
The P151 – Wheel Arm is a replacement part primarily used for Lägler Hummel floor sanding machines. It serves as a conversion shaft that allows newer Lägler Hummel wheels to be installed on older Hummel sanders manufactured prior to the year 2000.
Model: #PDPARTP151
$
109.84
Available to ship
P134 - Pivot Pin
P134 - Pivot Pin
This pivot pin is a critical component within the Hummel's drive assembly, ensuring proper mechanical linkage and movement. It is identified by the manufacturer part number P134 and the internal SKU 100.04.01.200. The part weighs approximately 1 lb.
Model: #PDPARTP134
$
33.34
Available to ship
P124 - Adjusting Ring Complete
P124 - Adjusting Ring Complete
The P124 – ADJUSTING RING, COMPLETE is a replacement part primarily used in Lägler HUMMEL and ELF floor sanding machines. It is a critical component of the handle assembly, allowing operators to adjust the machine's settings for optimal performance and ergonomics.
Model: #PDPARTP124
$
19.58
Available to ship
P123 - Pressure Spring
P123 - Pressure Spring
The P123 – Pressure Spring is a replacement part primarily used in Lägler Hummel and Superhummel floor sanding machines. It functions as a compression spring within the drive system to maintain proper tension and tracking.
Model: #PDPARTP123
$
24.16
Available to ship
P1257 - Wall Protecting Roller
P1257 - Wall Protecting Roller
The P1257 is a Wall-Protecting Roller. This accessory is designed to attach to sanding machines (such as edge sanders) to prevent the machine from damaging walls, baseboards, and trim while sanding close to edges. It acts as a buffer or guide wheel, allowing the operator to run the machine flush against vertical surfaces without marring the finish.
Model: #PDPARTP042
$
25.83
Available to ship
P907 - Motor Cable Pigtail
P907 - Motor Cable Pigtail
The P907 Motor Cable Pigtail (often listed as P907_Hummel, Pigtail) is a specialized service tool and cable assembly manufactured by Hummel. It is primarily used in industrial settings for connecting motors, particularly in applications requiring robust, waterproof cable gland systems.
Model: #P907
$
98.88
Available to ship
P836 - Emergency Switch Red Button
P836 - Emergency Switch Red Button
The P836 is a red emergency stop button (also known as a kill switch) specifically designed for Lägler floor sanding machines, including the Hummel, Superhummel, and Elf models. It serves as a critical safety component, allowing operators to immediately cut power to the machine in case of an emergency.
Model: #P836
$
80.35
Available to ship
P808 - Hummel Emergency Switch USA Complete
P808 - Hummel Emergency Switch USA Complete
The P808 – EMERGENCY SWITCH USA, COMPLETE is a replacement emergency kill switch assembly designed for Lägler floor sanding machines, specifically the 8" Hummel and 12" Single Phase Super Hummel models. It serves as a critical safety component to immediately cut power to the machine in case of an emergency.
Model: #P808
$
536.71
Available to ship
P826 - Hummel Mounting Case
P826 - Hummel Mounting Case
The P826 Mounting Case is designed to house and protect electrical or motor components associated with the HUMMEL sanding unit.
Model: #P826
$
59.55
Available to ship
Showing 1-18 of 75 results.
1
2
...
5
Page of 5