SENTINEL 626 CARPET & SHEET VINYL ADHESIVE REMOVER is a powerful, biodegradable, formulation designed specifically for quickly removing latex, acrylic, and pressure-sensitive adhesives from concrete, terrazzo, ceramic, and vinyl tile or wood substrates. REMOVAL OF LATEX, ACRYLIC, & PRESSURE-SENSITIVE ADHESIVES
Step 1. Apply 626 directly onto adhesive. Use a broom, mop or squeegee to agitate and
maintain even coverage while keeping the surface wet. Allow 626 to soak and
penetrate for 30-60 minutes.
Step 2. Scrape softened adhesive from the floor (razor scrapers or squeegees are preferred).
Repeat Steps 1 and 2 if necessary. Dispose of all waste.
Step 3. Rinse the sub-floor thoroughly with clean water. Allow surface to completely dry.
REMOVAL OF SHEET VINYL/LINOLEUM BACKING: Once the wear layer is removed, mix 1 part HOT water
to 4 parts 626 ( 1 quart of HOT water to 1 gallon of 626) and apply directly to the remaining backing. Maintain
even coverage and a wet surface for 1-2 hours or until backing/adhesive can be easily removed together with a
floor scraper. Rinse the surface with clean water and allow to dry.
REMOVAL OF CARPETING: Using a utility knife, cut the carpeting into 12" strips, making sure to cut through the
carpeting to the sub-floor). Mix 2 parts HOT water to 1 part 626 (2 gallons HOT water to 1 gallon 626) and pour
directly onto carpet. Maintain even coverage and completely saturate carpeting. Allow to soak for 4 hours, or overnight.
Remove carpet strips and follow latex removal procedures for removing remaining adhesive.