Remove adhesive from wood floors with Sentinel 922 Urethane Adhesive Remover. Use for cleaning wood floor adhesive and to remove urethane. This high performance formula is eco-friendly, low odor and biodegradable. Available in 2 convenient sizes for your home or workplace. It is recommended to clean and remove urethanes before they are fully cured.
Spot Cleaning On Newly Installed Floors Directions:
Apply Sentinel 922 with a rag or by pouring on the surface
Allow to soak for 1 hour
Using plastic putty knife, gently remove softened adhesive
Wipe excess urethane adhesive remover from the floor
Wash entire floor with 810 All Surface Floor Cleaner
Do not scrub to aggressively, this could alter the finish
Directions To Remove Adhesive From Wood:
Wet the adhesive surface with 922 with sprayer or mop
Allow to soak 30 - 60 minutes depending on thickness of adhesive
Scrape the softened adhesive with a plastic or razor scraper
Protect walls, drains, and cracks in flooring with an absorbent like kitty litter or sawdust
Wash and rinse with 810 All Surface Floor Cleaner
Removing Glued Down Wood Flooring:
Cut the wood in 8"x 8" square blocks with a circular saw
Be careful not to cut into the sub-floor
Vacuum sawdust off of the floor
Apply 922 liberally using a squeegee or mop
Make sure this penetrates the cut line
Allow 922 to penetrate floor 4 - 8 hours
Pry old flooring with a spade or similar tool
Squares should be intact and easily removable at this point